Standing desk / laptop stand

Wall-mounted laptop station.
Stylish and sleek plywood wall mounted standing desk / laptop stand, finished to a high standard. Ideal for home / shop / showroom / reception – restaurant, hair dresser, front-of-house, salon etc. Made in NZ by Modish.

This unique design allows each of the two supplied shelves (1 large & 1 small ) to be positioned at one of 16 heights. Each shelf is secured to the slotted board using a wooden “locking pin”. Cables are easily hidden behind the slotted face board.

Made from furniture AB grade, 18mm untreated pine plywood. This is an indoor piece, finished with 3 coats of polyurethane.

Can be positioned so bottom shelf is at sitting/desk height, or lowered for children.


Size of slotted board – 500mm wide x 800mm tall. Large shelf size – 600mm wide x 350mm deep (from slotted board) Small shelf size – 600mm wide x 220mm deep (from slotted board) Distance from wall to slotted board is 120mm

Assembly 1. install back panel – locate suitable position to mount the unit – needs to be screwed to wall stud. Measure from the floor to mark the install height. Suggestion – if you plan to use the bottom shelf of this unit in a sitting/seated position, measure approximately 750mm up from floor. Screw back panel to the wall using supplied 12G screws. Important – screw back panel to wall stud. NB – the back of the wall panel is marked “top” and “bottom”. 2. Place slotted face board over back panel. The “top” and “bottom” are marked on the reverse side. Secure to back panel with the four supplied stainless steel bolts. Finger-tighten nuts – do not over-tighten. 3. Insert each shelf at the required height – push the shelf in and slide it to the left. 4. Insert the plywood locking pin.

Do not sit on shelf!

NB – laptop not included!

Product Enquiry

Ask a question about this item . . .