Soap Slab Cutter

NZ $400.00
You are purchasing this item as a pre-order. Your cutter is made to order - the typical wait time is three to four weeks to shipping. To check the current wait time before ordering, please use the product enquiry form at the bottom of the page .

Our Soap Slab Cutter is designed to cut slabs into loaves and loaves into bars. It's the perfect match for our Soap Slab Mould

The Modish sliding tray slab cutter is made from furniture grade plywood and macrocarpa, and finished with natural plant oil. A choice of metal ball bearing drawer sliders or wood sliders is available - you are welcome to contact us if you wish to discuss. Please mention your preference in the order notes or email.

Features include-
  • Adjustable measuring stop (from a few mm to 120mm) and stainless steel ruler.
  • A wooden "table rail" underneath the cutter, allows it to be butted to the edge of the work table.
  • Rubber stoppers prevent the tray hitting the cutting wire.
  • Extended base at each side allows room to attach a clamp if required, or can be screwed  permanently to the work table.
  • Wooden slide rails are easily replaced - contact Modish for replacements
  • Strong durable frame - no need to hold the top bar while cutting (as shown in youtube videos of similar sliding tray cutters). You can keep both hands on the handles and slide it through the slab - easy!

Depth - A work table 60cm deep is recommended so there is enough room when the tray is "in" i.e. when the cut is completed.  See dimension diagrams below.  Tables less than 60cm can be used by clamping or screwing the unit to the work bench - you are welcome to contact Modish prior to ordering to discuss.
The overall width is 56cm and height from table top to top of the peg is 29cm.  The maximum cut to the right of the wire is 12cm and 31.5cm to the left of the wire.  Maximum height of soap slab is 14cm.  The inside tray depth is 31.5cm.

Shipping dimensions: (lxwxh) approx 58cm x 52cm x 34cm, with weight approx 9kg.


Modish slab soap cutter - overall dimensions

Modish slab soap cutter - cutting sizes


Wipe with a brush to clear surfaces of soap and botanicals, then a damp cloth to wipe down. Apply beeswax to runners if required.

Support - purchasers are welcome to contact Modish for support in the use of this item. If you happen to break a wire, please contact Modish for a replacement and guidance for winding. Please be extremely careful if you are removing or installing a new wire. The ends are particularly sharp and safety glasses must be worn.

NB - untested on melt and pour soaps.

Free shipping NZ wide. If you would like to pay for this item in instalments, please use the product enquiry form below, to discuss.

Write Review

Note: Do not use HTML in the text.

Product Enquiry

Ask a question about this item . . .