Stylish and sleek plywood wall mounted standing desk / laptop stand, finished to a high standard. Designed and NZ made by Modish. Ideal for home / shop / showroom / reception – restaurant, hair dresser, front-of-house, salon etc.
This unique design allows each of the two supplied shelves (one large and one small ) to be positioned at one of 16 heights. Each shelf is secured to the slotted board using a plywood “locking pin”. Cables are easily hidden behind the slotted face board.
This is the “easy-Fit” model and only requires two screws (to fix back panel to wall). Check my other listings for the Slimline model.
Made from furniture AB grade, 18mm untreated pine plywood. This is an indoor piece, finished with linseed oil, followed by 3 coats of polyurethane.
Can be positioned so bottom shelf is at sitting/desk height, or lowered for children.
Size of slotted board – 500mm wide x 800mm tall.
Large shelf size – 600mm wide x 350mm deep (from slotted board)
Small shelf size – 600mm wide x 220mm deep (from slotted board)
Distance from wall to slotted board is 150mm
Weight – 11Kg without packaging
1. install back panel – locate a suitable position to mount unit – must be screwed to wall stud. Measure up from floor to mark install height. Suggestion – if you plan to use bottom shelf of unit in a sitting/seated position, you would need to measure approximately 750mm up from floor. Screw back panel to wall using supplied 12G screws. It is important to screw the back panel to a wall stud. NB – the back of the wall panel is marked “top” and “bottom”.
2. Place the slotted face board over the back panel – push it over the four tabs and it will drop down into position. NB – the “top” and “bottom” are marked on the reverse side.
3. Insert each shelf at the required height – push the shelf in and slide it to the left.
4. Insert the plywood locking pin.
Do not sit on shelf!